Transform Your Cement Tiled Roof
Tough-Durable with Great Street Appeal
Transform Your Metal Roof
Tough-Durable with Great Street Appeal
Solaflex-The Industry Standard Since 1978
Transform your Cement Tiled Roof with Solaflex.
Unlike the normal repainting of weathered concrete tiles, Solaflex and its specialty surface sealers fulfils the replacement of the weathered factory finish in a positive and long-term manner addressing not only aesthetics, but the durability, adhesion and mould regrowth aspects.
Once installed, this system forms a uniform protective covering that protects, maintains and enhances the roof for many years to come. Solaflex membranes are installed at a fraction of the cost of re-roofing, are aesthetically pleasing and are backed by the strength of our 10 year manufacturer warranty.
Transform your Metal Roof with Solaflex.
Why Replace Your Metal Roof When You Can Restore it to a new condition with Solaflex. Solaflex and its specialty anticorrosive primers are installed in a system of products that address adhesion, corrosion and watertight performance of the roof. During new construction the coatings are applied to new zincalume roofing and provide an attractive finish that will outlast factory coated roofing sheet.
Existing aged, corroded metal roofs are repaired and re-fastened then treated with a scientific blend of penetrating, oxygen and moisture displacing rust encapsulant that halts present corrosion and allows the existing heavy gauge metal to remain in place.
OPAL WWN 035
CAFE OLE WM17CC 196-6
Transform your Faded Metal Roof with Solaflex.
Solaflex is highly water resistant, has excellent flexibility and is adhesion promoted, providing a strong bond to the substrate. It is Ultra UV Tough, fade resistant and will provide an attractive finish that will outlast all factory coated roofing sheet.
CRISP LINEN WWN 085
ANTIQUE PEWTER WM17CC 140-3
Solaflex PCM Gloss
Polycarbonate Modified Premium Roofing Topcoat.
Solaflex PCM Gloss is an ultra-tough, UV and fade resistant roofing membrane with outstanding adhesion, water resistance and long-term durability. It is hard wearing, highly weather resistant and specifically designed for the restoration of weathered cement tiles and metal roofing.
Features
- Ultra-tough UV resistance.
- Permanently flexible.
- Dirtguard® Technology.
- Highly water resistant.
- Mould and Mildew Protection.
- 2 Hour recoat.
Benefits
- Keeps rich depth of colour.
- Moves with substrate.
- Strong weather resistance.
- Protects substrate.
- Ideal for tropical environments.
- Easy Water clean-up.
Features
- Ultra-tough UV resistance.
- Permanently flexible.
- Dirtguard® Technology.
- Highly water resistant.
- Mould and Mildew Protection.
- 2 Hour recoat.
Benefits
- Keeps rich depth of colour.
- Moves with substrate.
- Strong weather resistance.
- Protects substrate.
- Ideal for tropical environments.
- Easy Water clean-up.
Solaflex PCM Low Sheen
Polycarbonate Modified Premium Roofing Topcoat.
Solaflex PCM Low Sheen is an ultra-tough, UV and fade resistant roofing membrane with outstanding adhesion, water resistance and long-term durability. It is hard wearing, highly weather resistant and specifically designed for the restoration of weathered cement tiles and metal roofing.
Features
- Ultra-tough UV resistance.
- Permanently flexible.
- Dirtguard® Technology.
- Highly water resistant.
- Mould and Mildew Protection.
- 2 Hour recoat.
Benefits
- Keeps rich depth of colour.
- Moves with substrate.
- Strong weather resistance.
- Protects substrate.
- Ideal for tropical environments.
- Easy Water clean-up.
Features
- Ultra-tough UV resistance.
- Permanently flexible.
- Dirtguard® Technology.
- Highly water resistant.
- Mould and Mildew Protection.
- 2 Hour recoat.
Benefits
- Keeps rich depth of colour.
- Moves with substrate.
- Strong weather resistance.
- Protects substrate.
- Ideal for tropical environments.
- Easy Water clean-up.
Barrier
Anti-Mould Solution to retard under-film mould regrowth under paint.
The product can be used as an under-film mould retardant, fungal and algicide wash on surfaces previously contaminated with mould that are prepared ready to have a surface coating applied. Barrier is applied to the surface just prior to the paint application to form a residual layer that retards the regrowth of any dormant mould spores beneath the new paint.
Features
- Retards under-film regrowth.
- Excellent substrate wetting.
Benefits
- Paint systems last longer.
- Deep surface penetration.
Features
- Retards under-film regrowth.
- Excellent substrate wetting.
Benefits
- Paint systems last longer.
- Deep surface penetration.
Tile Sealer
Surface conditioner. sealer, binder for pressure washed concrete roof tiles.
Tile Sealer is a blend of fine particle sized pure acrylic resins and proprietary surfactants specially formulated as a penetrating sealer/binder for freshly cleaned concrete roofing tiles prior to the application of a protective topcoat membrane.
Features
- Strong sealing and binding.
- Low VOC.
- Strong inter coat adhesion.
- Highly tolerant to new green mortar.
- High tack dry surface.
- 1 hour recoat.
Benefits
- Binds micro Contaminants.
- Environmentally friendly.
- Permanent bond to topcoats.
- No alkali burn of topcoats.
- Safe for roofing applicators.
- Easy water clean up .
Features
- Strong sealing and binding.
- Low VOC.
- Strong inter coat adhesion.
- Highly tolerant to new green mortar.
- High tack dry surface.
- 1 hour recoat.
Benefits
- Binds micro Contaminants.
- Environmentally friendly.
- Permanent bond to topcoats.
- No alkali burn of topcoats.
- Safe for roofing applicators.
- Easy water clean up .
Multi-seal
Sealer and binder for loose or powdered surfaces before painting.
Multi-Seal offers outstanding sealing, binding and stain bleed resistance. When used as the first coat of a coating system for new and aged construction surfaces. Multi-Seal penetrates the surface and binds in any loose particles to the substrate ensuring the surface is free of contaminants that can ultimately cause adhesion failure of subsequent undercoats and protective finishes.
Features
- Outstanding contaminant binding.
- Excellent substrate wetting.
- Strong binding power.
- Excellent stain bleed resistance
- Strong inter-coat adhesion.
- No aggressive solvents.
- Alcohol & water based.
Benefits
- Binds loose surface contaminants.
- Deep surface penetration.
- Stabilizes powdery surfaces.
- Holds back staining.
- Bonds with final topcoat.
- Does not blister old paints.
- Two hour recoat.
Features
- Outstanding contaminant binding.
- Excellent substrate wetting.
- Strong binding power.
- Excellent stain bleed resistance
- Strong inter-coat adhesion.
- No aggressive solvents.
- Alcohol & water based.
Benefits
- Binds loose surface contaminants.
- Deep surface penetration.
- Stabilizes powdery surfaces.
- Holds back staining.
- Bonds with final topcoat.
- Does not blister old paints.
- Two hour recoat.
Cap Sealer
Alkaline resistant sealer for fresh ridge capping mortar repairs and as a surface filler for weathered cement tiles.
Cap Sealer is a low VOC water-based, 100% acrylic sealer, binder and high build elastic base coat membrane with excellent substrate fill and resistance to alkali burn from new cement mortar repairs. The product is used as a specialty sealer by the roof restoration industry for application to fresh green ridge capping mortar repairs that are carried out during the restoration process of a cement tiled roof.
Features
- Strong sealing and binding.
- Highly tolerant to new green mortar.
- Strong inter coat adhesion.
- High build elastic surface filler.
- High tack dry surface.
- 1 hour recoat.
Benefits
- Binds micro contaminants.
- No alkali burn or leaching salts
- Permanent bond to topcoats.
- Smooths out weathered tiles.
- Safe for roofing applicators.
- Easy water clean up .
Features
- Strong sealing and binding.
- Highly tolerant to new green mortar.
- Strong inter coat adhesion.
- High build elastic surface filler.
- High tack dry surface.
- 1 hour recoat.
Benefits
- Binds micro contaminants.
- No alkali burn or leaching salts
- Permanent bond to topcoats.
- Smooths out weathered tiles.
- Safe for roofing applicators.
- Easy water clean up .
Rustraint
Penetrating-moisture-displacing rust encapsulant.
Rus-traint is a penetrating, moisture displacing, rust encapsulating inhibitor; manufactured from a scientifically balanced blend of penetrating oils, rust inhibitors, oxygen and moisture resistant resins. When applied directly over rust, it will penetrate the finest pores and cavities in the rust, displacing the trapped moisture and encapsulating the rust as a pigment in the dry film. It converts rust into a micro-pore free, fully functional surface ready for painting.
Features
- Encapsulates rust.
- Excellent corrosion wetting.
- Makes use of rust.
- Excellent stain bleed resistance.
- Micro poor free film.
- Under film corrosion protection.
Benefits
- Saves time on preparation
- Deep surface penetration.
- Converts existing corrosion.
- Holds back rust staining.
- Ready for required topcoats.
- Retards paint film undercut.
Features
- Encapsulates rust.
- Excellent corrosion wetting.
- Makes use of rust.
- Excellent stain bleed resistance.
- Micro poor free film.
- Under film corrosion protection.
Benefits
- Saves time on preparation
- Deep surface penetration.
- Converts existing corrosion.
- Holds back rust staining.
- Ready for required topcoats.
- Retards paint film undercut.
AC-3 IR Grey Primer
An Infrared Heat Reflective Anti-Corrosive Primer.
AC-3 Primer is a premium grade, water-based, 100% acrylic anti-corrosive primer coating, designed for use on all correctly prepared metal substrates. AC-3 Primer is low in Volatile Organic Compounds and adhesion promoted for outstanding direct to substrate adhesion, even on difficult substrates such as aluminium, glass, melamine and new galv metal.
Features
- Heat Reflective.
- Strong adhesion to all metals.
- Flash rust inhibitor.
- Strong adhesion to
- Water Based.
Benefits
- Energy Efficient
- Including aluminium.
- Stops nail head flash rust.
- Glass, melamine & aged alkyd.
- Easy water clean up.
Features
- Heat Reflective.
- Strong adhesion to all metals.
- Flash rust inhibitor.
- Strong adhesion to
- Water Based.
Benefits
- Energy Efficient
- Including aluminium.
- Stops nail head flash rust.
- Glass, melamine & aged alkyd.
- Easy water clean up.
B16 IR Grey Primer
A Quick Dry Infrared Heat Reflective Anti-Corrosive Primer.
B16 IR Grey Primer is a premium grade, quick dry synthetic alkyd anti-corrosive primer, designed for use on all correctly prepared metal substrates. It is adhesion promoted for outstanding direct to substrate adhesion and provides excellent adhesion even on difficult substrates such as aluminium.
Features
- Heat Reflective.
- Strong anti corrosive properties.
- Quick dry.
- Strong bond to
- Very low absorptance.
Benefits
- Energy Efficient
- Corrosion free paint system.
- Fast cure in all weather conditions.
- Galv metal, Colorbond, aluminium.
- B.C.A. CodeMark Certified .
Features
- Heat Reflective.
- Strong anti corrosive properties.
- Quick dry.
- Strong bond to
- Very low absorptance.
Benefits
- Energy Efficient
- Corrosion free paint system.
- Fast cure in all weather conditions.
- Galv metal, Colorbond, aluminium.
- B.C.A. CodeMark Certified .
B-16 Z/P Red Oxide Anti-Corrosive Primer
A Cathodic Barrier with Outstanding Adhesion to New Metal Surfaces
B16 Primer is a premium grade, quick dry synthetic alkyd anti-corrosive primer, designed for use on all correctly prepared metal substrates. It is adhesion promoted for outstanding direct to substrate adhesion and provides excellent adhesion even on difficult substrates such as aluminium.
Features
- High zinc phosphate content.
- High solids concentrate.
- Fast drying.
- Strong adhesion to all metals.
- Excellent inter-coat adhesion.
Benefits
- Strong cathodic Protection.
- Can be cut by up to 40%.
- Can be top coated within 2 hours.
- Including aluminium
- Strong tie coat for acrylic paints.
Features
- High zinc phosphate content.
- High solids concentrate.
- Fast drying.
- Strong adhesion to all metals.
- Excellent inter-coat adhesion.
Benefits
- Strong cathodic Protection.
- Can be cut by up to 40%.
- Can be top coated within 2 hours.
- Including aluminium
- Strong tie coat for acrylic paints.
Heat Reflective Coatings for New Construction and Renovation.
Energy Star® coatings are sustainable and Energy Efficient solutions for roofs and walls that significantly reduce absorbed heat in the building envelope.
The use of Energy Star® systems during restoration or new construction results in energy cost savings, cooler occupancy zones and reduced Co2 emissions.
Why Choose Energy Star
Cool Roofing and Cool Walls
In a climate dominated by heat, it makes sense to start with a building envelope that is highly reflective to sunlight, as a Cool roof and Cool walls will provide an optimum start point for the energy efficient design of any building.
Energy Star paints are ultra-UV tough, fade resistant and retain their rich depth of colour for the life of the paint. We guarantee your home will keep that just painted look and street appeal for up to four longer than other exterior paints.
OPAL WWN 035
CAFE OLE WM17CC 196-6
Why absorb the sun when you can reflect it.
Energy Star infrared heat reflective coatings reflect fully 50% of solar heat by infrared reflection. Even in darks colours, their low solar absorbance and high emittance, significantly reduces absorbed heat in the building envelope.
OPAL WWN 035
CAFE OLE WM17CC 196-6
CRISP LINEN WWN 085
ANTIQUE PEWTER WM17CC 140-3
Infrared heat is reflected - reducing absorbed heat in the roof and walls.
Energy Star Coatings reflect fully 50% of Solar energy with our exclusive technology of colour infused nano ceramics that reflect heat by selective reflection of infrared light.
The IR heat signature was captured by an infrared camera from the rear of two panels during a Solar Radiation Exposure test. One panel was Astec Energy Star® Low Sheen and the other, a competitor’s premium exterior acrylic. Both panels were identical in colour.
Solar reflectance values for the Energy Star paints are 58% higher than the standard paints of the same colour and will result in energy cost savings, cooler occupancy zones and reduced Co2 emissions.
Independent third-party testing and certification.
You will have the peace of mind that Energy Star paints have undergone rigorous testing and are the only heat reflective paints in Australia to qualify for independent third-party accreditation.
CodeMark Certification.
Energy Star paints have CodeMark Independent third-party accreditation for heat reflective coatings that provides our clients' assurance that the Energy Star products used will perform as stated.
Environmental Certification.
Energy Star paints has The Good Environmental Choice Australia Certification Label. The only environmental labeling program in Australia which indicates the environmental performance of a product from a whole of product life perspective for consumer goods.
Australian Made and Owned.
Wallmaster Paints are a leading Australian paint brand that remains 100% Aussie Owned and Operated. We are proud of what we make and that our products can carry the Australian Made and Owned Logo
Restore your roof with Energy Star and transform your home Into a cool energy efficient home with great street appeal.
Join the thousands of homeowners and businesses throughout Australia that choose Energy Star to transform their building into a cool energy efficient property. Your roof will be significantly cooler, tough and resilient to all weather conditions and is backed by the strength of our 10-year manufacturer warranty on materials and labour. Since-1978
Energy Star on Cement Sheet Cladding is tough durable, fade resistant and remains cooler than any other black.
Now more than ever with matt and black finish back in trend throughout Australia, deep tone durability, long-term fade resistance and heat build-up in the substrate are important considerations when choosing the product to protect and decorate your home.
Energy Star will reflect fully 50% of solar heat by infrared reflection. Even in darks colours, their low solar absorbance and high emittance will significantly reduce absorbed heat.
Energy Star paints remain cooler than any other blacks, are ultra-UV tough, fade resistant and retain their rich depth of colour for the life of the paint. They are smooth, nonabrasive and give off a warm, subtle, and very natural glow.
As you can see, the James Hardie® Matrix Cladding painted with Energy Star Matt, it gives off the unique appearance of a high-grade factory finished panel at a fraction of the cost. We guarantee your home will keep that just painted look and street appeal for up to three times longer than other exterior paints.
OPAL WWN 035
CAFE OLE WM17CC 196-6
Heat Reflective, Tough & Energy Efficient.
- Reflects fully 50% of infrared heat.
- Cool and Energy Efficient surfaces.
- Ultra UV Tough and Fade Resistant.
- Excellent water resistance.
- Mould and Mildew Protection.
- Strong stain resistance.
- Australian Made and Owned.
