Prep-Coats
Multi-seal
Sealer and binder for loose or powdered surfaces before painting.
Multi-Seal offers outstanding sealing, binding and stain bleed resistance. When used as the first coat of a coating system for new and aged construction surfaces. Multi-Seal penetrates the surface and binds in any loose particles to the substrate ensuring the surface is free of contaminants that can ultimately cause adhesion failure of subsequent undercoats and protective finishes.
Features
- Outstanding contaminant binding.
- Excellent substrate wetting.
- Strong binding power.
- Excellent stain bleed resistance
- Strong inter-coat adhesion.
- No aggressive solvents.
- Alcohol & water based.
Benefits
- Binds loose surface contaminants.
- Deep surface penetration.
- Stabilizes powdery surfaces.
- Holds back staining.
- Bonds with final topcoat.
- Does not blister old paints.
- Two hour recoat.
Rustraint
Penetrating-moisture-displacing rust encapsulant.
Rus-traint is a penetrating, moisture displacing, rust encapsulating inhibitor; manufactured from a scientifically balanced blend of penetrating oils, rust inhibitors, oxygen and moisture resistant resins. When applied directly over rust, it will penetrate the finest pores and cavities in the rust, displacing the trapped moisture and encapsulating the rust as a pigment in the dry film. It converts rust into a micro-pore free, fully functional surface ready for painting.
Features
- Encapsulates rust.
- Excellent corrosion wetting.
- Makes use of rust.
- Excellent stain bleed resistance.
- Micro poor free film.
- Under film corrosion protection.
Benefits
- Saves time on preparation
- Deep surface penetration.
- Converts existing corrosion.
- Holds back rust staining.
- Ready for required topcoats.
- Retards paint film undercut.
Barrier
Anti-Mould Solution to retard under-film mould regrowth under paint.
The product can be used as an under-film mould retardant, fungal and algicide wash on surfaces previously contaminated with mould that are prepared ready to have a surface coating applied. Barrier is applied to the surface just prior to the paint application to form a residual layer that retards the regrowth of any dormant mould spores beneath the new paint.
Features
- Retards under-film regrowth.
- Excellent substrate wetting.
Benefits
- Paint systems last longer.
- Deep surface penetration.
Rivett
Penetrating sealer-binder for friable asbestos and masonry substrates.
Rivett is a clear solvent based penetrating solution that offers outstanding sealing and binding powers. It is an effective first sealer/binder for soft friable masonry walls or any porous substrates requiring new surface stability prior to the application of an aesthetic or protective finish.
Features
- Outstanding contaminant binding.
- Excellent substrate wetting.
- Strong binding power.
- Strong inter-coat adhesion.
- Highly water resistant.
Benefits
- Binds loose surface contaminants.
- Deep surface penetration.
- Stabilizes powdery surfaces.
- Bonds with final topcoat.
- Remains hard exposed to water.
Enviroclean
Water based wax, grease, oil and silicone cleaning solution .
Enviro-Clean is a water-based formulation designed to remove wax, grease, oil, silicone, automotive exhaust build up and general dirt off most painted and unpainted surfaces.
Enviro-Clean will remove most contaminants from external or internal surfaces without the use of environmentally damaging solvent, acid or alkali-based cleaning solutions.
Features
- Water based.
- No harmful solvents.
- Compatible with most surfaces.
Benefits
- Environmentally safe
- Reduced personnel exposure.
- Safe to use before undercoats.
